Eloise Bihar
PhD
Research Interests:
autonomous biosensors, wearable electronics, organic electronics electrophysiology
- M. N. Renny, B.D. Curvey, N. L. Alvarado, B. S. Allen, J. J. Stewart, G. T. Seymour, C. A. Crichton, E. J. Strand, E. Bihar, G. L. Whiting, S. M. Gleason, R. R. McLeod, “Statistical Analysis of an OECT-based Thermometer-Psychrometer toward Multianalyte In Vivo Applications,” Manuscript in preparation (2022)
- E. J. Strand, M. J. Palizzi, C. A. Crichton, M. N. Renny, E. Bihar, R. R. McLeod, G. L Whiting, “Multimodal Operation of Printed Electrochemical Transistors for Sensing in Controlled Environment Agriculture,” Manuscript submitted (2022)
- E. Bihar, Elliot J. Strand, C. A. Crichton, M. N. Renny, I. Bonter, T. Tran, M. Atreya, A. Gestos, J. Haseloff, R. R. McLeod, G. L. Whiting, “Self-healable printed electronic cryogels for bioelectronics and plant monitoring,” Manuscript submitted (2022)
- M. Atreya, S. Desousa, J-B. Kauzya, E. Williams, K. Dikshit, A. Hayes, J. Nielson, A. Palmgren, S. Liu, S. Khorchidian, A. Gopalakrishnan, E. Bihar, C. J Bruns, R. D. Bardgett, J. N. Quinton, J. Davies, J. C Neff, G. L Whiting, “A Transient Printed Soil Decomposition Sensor based on a Biopolymer Composite Conductor,” Advanced Science, 2205785 (2022)
- E. J. Strand, E. Bihar, S. M. Gleason, S. Han, S. W. Schreiber, M. N. Renny, G. G. Malliaras, R. R. McLeod, G. L Whiting, “Printed Organic Electrochemical Transistors with Internal Ion Reservoirs for Detecting Macronutrients in Whole Plant Sap,” Advanced Materials Electronics, 2100853 (2021)
- D Corzo, E Bihar, EB Alexandre, D Rosas‐Villalva, D Baran, “Ink Engineering of Transport Layers for 9.5% Efficient All‐Printed Semitransparent Nonfullerene Solar Cells,” Advanced Functional Materials 31 (7), 2005763 (2021)
- A Saleh, S Wustoni, E Bihar, JK El-Demellawi, Y Zhang, A Hama, V Druet, Arief Yudhanto, Gilles Lubineau, Husam N Alshareef, Sahika Inal, “Inkjet-printed Ti3C2Tx MXene electrodes for multimodal cutaneous biosensing,” Journal of Physics: Materials 3 (4), 044004 (2020)
- E. Bihar, D. Corzo, T. C. Hidalgo, D. Rosas-Villalva, K. N. Salama, S. Inal, D. Baran, “Fully Printed, Ultrathin And Conformable Water-Resistant Organic Photovoltaics As Power Source For Biological Applications,” Advanced Materials Technologies 5 (8), 2000226 (2020)
- T. Beduk, E Bihar, SG Surya, AN Castillo, S Inal, KN Salama, “A paper-based inkjet-printed PEDOT: PSS/ZnO sol-gel hydrazine sensor,” Sensors and Actuators B: Chemical 306, 127539 (2020)
- D. A. Corzo Diaz, K. Almasabi, E. Bihar, S. Macphee, D. Rosas-Villalva, N, Gasparini, S. Inal, D. Baran, “Digital Inkjet Printing of High-Efficiency Large-Area Nonfullerene Organic Solar Cells,” Advanced Materials Technologies, (2019)
- S. Wustoni, A. Savva, R. Sun, E. Bihar, S. Inal, “Enzyme‐free detection of glucose with a hybrid conductive gel electrode,” Advanced Materials Interfaces, (2019)
- E. Bihar, S. Wustoni, A. M. Pappa, K. N. Salama, D. Baran, S. Inal, “A fully inkjet-printed disposable glucose sensor on paper,” NPJ Flexible electronics 2 (1), 30 (2018)
- E. Bihar, T. Roberts, Y. Zhang, E. Ismailova, T. Hervé, G. G. Malliaras, J. B. De Graaf, S. Inal, M. Saadaoui, “Fully printed all-polymer tattoo/textile electronics for electromyography,” Flexible and Printed electronics 3 (3) (2018)
- E. Bihar, T. Roberts , E. Ismailova, M. Saadaoui,T. M. Isik, A. Sanchez-Sanchez, D. Mecerreyes, T. Hervé, J. B. De Graaf, G. G. Malliaras, “Fully-printed electrodes on stretchable textiles for long-term electrophysiology,” Advanced Materials Technologies (2017)
- E. Bihar, T. Roberts , M. Saadaoui,T. Hervé, J. B. De Graaf, G. G. Malliaras, “Inkjet-printed PEDOT:PSS electrodes on paper for electrocardiography,” Advanced Heathcare Materials (2016)
- E. Bihar, Y. Deng,T. Miyake, M. Saadaoui, G. G. Malliaras, M. Rolandi, “A disposable paper breathalyzer with an alcohol sensing using organic electrochemical transistor,” Scientific Reports 6, 2016
- D. Unnikrishnan, D.Kaddour, S.Tedjini, E. Bihar, M. Saadaoui, “CPW-fed Inkjet-printed UWB antenna on ABS-PC for integration in Molded Interconnect Devices technology,” IEEE Antennas and Wireless Propagation Letters 14, 2015, 1125-1128
- D. A Koutsouras, E. Bihar, J. A Fairfield, M. Saadaoui, G. G Malliaras, M. Irimia‐Vladu, E. D Glowacki, N. S. Sariciftci, S. Bauer, " Green Materials for electronics, 2017
- E. Bihar, Elliot J. Strand, C. A. Crichton, M. N. Renny, I. Bonter, T. Tran, M. Atreya, A. Gestos, J. Haseloff, R. R. McLeod, G. L. Whiting, “Printed electronic stretchable cryogels for bioelectronics and plant monitoring,” Poster Presentation – Asilomar Bioelectronics, September 2022, Pacific Grove, USA
- Gel-based electronics for plant sensing
- E. Bihar, Elliot J. Strand, C. A. Crichton, M. N. Renny, I. Bonter, T. Tran, M. Atreya, A. Gestos, J. Haseloff, R. R. McLeod, G. L. Whiting, Oral presentation- Invited talk – MRS Spring 2022, May 2022, Hawaii, USA,
- E. Bihar, S. Wustoni, A. M. Pappa, D. Baran, K. N. Salama, S. Inal, An all inkjet-printed glucose sensor on paper, Oral presentation – EuroAnalysis 2019, September 2019, Istanbul, Turkey
- E. Bihar, S. Wustoni, A. M. Pappa, D. Baran, K. N. Salama, S. Inal, “A fully inkjet-printed noninvasive glucose sensor on paper,” Oral presentation – EMRS, June 2019, Nice, France
- E. Bihar, Timothée Roberts, Yi Zhang, Esma Ismailova, Thierry Hervé, George G. Malliaras, Jozina B. De Graaf, Mohamed Saadaoui, Sahika Inal, “Fully Printed All-Polymer Tattoo/Textile Electronics for Electromyography,” Oral Presentation - MRS FALL 2018, November 2018, Boston, USA
- E. Bihar, A. M. Pappa, V. Curto, C. Davidson, M. Saadaoui, G. G. Malliaras, “High-performance OECTs made by inkjet-printing for glucose sensing on paper,” Poster Presentation - WBC 2016- May 2016, Montréal, Canada
- E. Bihar, T. Roberts, M. Saadaoui, J. B. De Graaf et G. G. Malliaras, “Fully Printed Electrodes on Textiles for Healthcare Monitoring,” Oral presentation - MRS SPRING 2016, March 2016, Phoenix, USA,
- E. Bihar, Y. Deng,T. Miyake, M. Saadaoui, G. G. Malliaras, M. Rolandi, “A disposable alcohol sensor breathalyzer using printed organic electrochemical transistors on paper,” Poster presentation - BIOEL 2016, March 2016, Kirchberg, Austria,
- E. Bihar, T. Hervé, M. Saadaoui, et G. G. Malliaras, “High-performance OECTs made by inkjet-printing for customized bioelectronics devices,” Oral presentation – NANOTEXNOLOGY, July 2015, Thessalonique, Grèce
- E. Bihar, T. Hervé, M. Saadaoui, et G.G. Malliaras, “Printed OECTs with highly conducting channels,” Poster Presentation - MRS SPRING 2015, April 2015, San Francisco, USA
- Inkjet-printed gel-electronics for biosensing and electrostimulation, Pending 2022
- Fully Printed Organic Electrochemical Transistors with Internal Ion Reservoirs for Detecting Macronutrients in Raw Plant Sap (PCT/US2022/034394), 2021
- Surface-treated cross-linked functional layers for optoelectronic devices (WO-2021152539-A1), 2021
- Inkjet-printed metabolite sensors, Patent pending (PCT/IB2019/053496), 2018