University at Buffalo (UB)
Victor Paquet
ScD
Research Topics
Universal design, human performance in disability, occupation ergonomics to promote health
Publications by Category
- Choi, J., Maisel*, J., Perez, B., Nguyen, D. and Paquet, V. (2021). User experiences with two new wheelchair securement systems in large accessible transit vehicles. Transportation Research Record: 2675(2): 150-161.
- Mahdavilayen, M., Paquet, V., He, (2020). Effects of bus boarding conditions on bus dwell time and bus schedule adherence when used by passengers with mobility limitations. Journal of Transportation Engineering, Part A: Systems. DOI: 10.1061/JTEPBS.0000365.
- Perez, B., Choi, J., Paquet, V., Lenker, J., Kocher, L., Nemade, M., Kern, C. and Steinfeld, E. (2019). Comparison of wheelchair securement systems designed for use in large accessible transit vehicles (LATVs). Assistive Technology, DOI: 10.1080/10400435.2019.1604582.
- D’Souza, C., Paquet, V. Lenker, J. and Steinfeld, E. (2017). Self-reported difficulty and preferences of wheeled mobility device users for simulated low-floor bus boarding, interior circulation and disembarking. Disability and Rehabilitation: Assistive Technology, pp. 1-14.
- D’Souza, C., Paquet, V. Steinfeld, E., and Lenker, J. (2017). Effects of transit vehicle configuration on wheeled mobility user performance during simulated boarding and embarking. Applied Ergonomics, 62: 94-106.
- Lenker, J., Lien, L. Nasarwangi, M., Feathers*, D. and Paquet, V. (2016). Universal design as a conceptual framework for describing usability of products and environments. Journal of Design Research, 14(3): 219-240.
- Lenker, J., Damle, U., D’Souza, C., Paquet, V., Mastare, T., and Steinfeld, E. (2016). A usability evaluation of access ramps used in public transit buses. Journal of Public Transportation, 19(2): 109-127.
- Paquet, V., Joseph, C. and D’Souza, C. (2012). Computer re-sampling for demographically representative user populations in anthropometry: a case of doorway and clear floor space widths. Work, 41 (Suppl. 1): 4098-4101.
- Paquet, V., Joseph, C. and D’Souza, C. (2012). Computer re-sampling for demographically representative user populations in anthropometry: a case of doorway and clear floor space widths. Work, 41 (Suppl. 1) 4098-4101.
- D’Souza, C., Paquet, V., Lenker, J., Steinfled, E. and Bareria, P. (2012). Low-floor bus design preferences of walking aid users during simulated boarding and alighting. Work, 41 (Suppl. 1): 4951-4956.
- D'Souza, C., Steinfeld, E., Paquet, V. and Feathers, D. (2010). Space requirements for wheeled mobility devices in public transportation: analysis of clear floor space requirements. Transportation Research Record: Journal of the Transportation Research Board, No. 2145, 66-71.
- Lenker, J., Nasarwanji, M., Paquet, V. and Feathers, D. (2011). A tool for rapid assessment of product usability and universal design: development and preliminary psychometric testing, Work, 39 (2): 141-150.
- Beecher, V. and Paquet V. (2005). A survey instrument for the universal design of consumer products, Applied Ergonomics, 36: 363-372.
- Lenker, J. and Paquet, V. (2004). A new conceptual model for assistive technology outcomes research and practice, Assistive Technology, 16: 1-10.
- Paquet, V. and Feathers, D. (2004). An anthropometric study of manual and powered wheelchair users, International Journal of Industrial Ergonomics, 33(3): 191-204.
- Feathers, D., Paquet, V. and Drury C. (2004). Measurement consistency and three-dimensional electromechanical anthropometry, International Journal of Industrial Ergonomics, 33(3): 181-190.
- Lenker, J. and Paquet, V. (2003) A review of conceptual models for assistive technology use and outcome, Assistive Technology, 15(1): 1-15.
- Lenker, J., D’Souza, C., and Paquet, V. (accepted). Vehicle Design. In: Accessible Public Transportation, Taylor & Francis Group, LLC.
- Paquet, V. (2001). Workplace Facilities. In Universal Design New York. G.S. Danford and B. Tauke (eds), Vanguard Direct, pp. 95-102.
- Perez, B., Kocher, L., Nemade, M., Paquet, V., and Lenker, J. (accepted). Usability of transit bus equipment for access and securement for individuals with mobility impairment. Proceedings of 7th International Conference on Applied Human Factors and Ergonomics (AHFE 2016), Orlando, FL July 27-31, 2016.
- Perez, B., Kocher, L., Nemade, M., Paquet, V., and Lenker, J. (accepted). Usability of public transit bus ramp slopes for wheeled mobility device users. Proceedings of the RESNA/NCART 2016 Conference, RESNA/NCART 2016 Conference, Arlington, VA, July 10-14, 2016.
- D'Souza, C., Zhu, X., Steinfeld, E., Lenker, J. & Paquet, V. (2015). Human Factors Study of Accessible Buses Using Full Scale Simulations. Proceedings of the 14th International Conference on Mobility and Transport for Elderly and Disabled Persons (TRANSED), Part A, R. Mercario (Ed.), Lisbon, Portugal, July 28-31, 2015, pg: 343 - 354. ISBN: 978-989-20-6262-4.
- D’Souza, C., Paquet, V. and Steinfeld, E. (2012). Clearance and space envelopes of wheeled mobility device users for computer workstations. Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society. Boston, MA.
- Steinfeld, E., Grimble, M., Paquet, V., Steinfeld, A., Rao, S. and Tran, S. (2012). Identifying accessibility problems in existing transit systems. Proceedings of the 13th International Conference on Mobility and Transport for Elderly and Disabled Persons (TRANSED). New Delhi, India.
- Steinfeld, E., D’Souza, C., Lenker, J., Paquet, V. and Bareria, P. (2012). Full scale simulations of accessible buses. Proceedings of the 13th International Conference on Mobility and Transport for Elderly and Disabled Persons (TRANSED). New Delhi, India.
- Bareria, P., D’Souza, C., Lenker, J., Paquet, V. and Steinfeld, E. (2012). Performance of visual impaired users during simulated boarding and alighting on low-floor buses. Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society. Boston, MA.
- Nasarwanji, M., Paquet, V. and Steinfeld, E. (2012). Age differences in postural strategies for low forward reach. Proceedings of the 4th International Conference on Applied Human Factors and Ergonomics. San Francisco, CA.
- Lenker, J., Chau, A., Dionne, T., Nasarwanji, M. and Paquet, V. (2011). Evaluating the functional limitation and impairment simulation kit (FLISK). Proceedings of the Festival of International Conferences on Caregiving, Disability, Aging and Technology. Toronto, Canada.
- Lenker, J., Nasarwanji, M., Paquet, V. and Feathers, D. (2011). The rapid assessment of usability and universal design (RAPUUD). Proceedings of the Festival of International Conferences on Caregiving, Disability, Aging and Technology. Toronto, Canada.
- Nasarwanji, M., Joseph, C. and Paquet, V. (2010). Restricted vs. unrestricted space for L-turns: A debate in environmental design. Proceedings of the 54nd Annual Meeting of the Human Factors and Ergonomics Society. San Francisco, CA.
- Steinfeld, E., Paquet, V., Lenker, J., D'Souza, C. and Maisel, J. (2010). Universal design research on boarding and using buses. Paper presented at the 12th International Conference on Mobility and Transport for Elderly and Disabled Persons, TRANSED 2010, Hong Kong, June 2010.
- D'Souza, C., Paquet, V., Steinfeld, E., White, J. and Feathers, D. (2010). Anthropometric data visualization tools to improve accessibility of built environments. Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics, 2010 AHFE International, Miami, FL, July 2010.
- Steinfeld, E., D'Souza, C., Paquet, V., White, J. and Feathers, D. (2010, July 2010). Clear floor area for wheeled mobility users. Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics, 2010 AHFE International, Miami, FL, July 2010.
- Joseph, C., D'Souza, C., Paquet, V. and Feathers, D. (2010, July 2010). Comparison of hand grip strength between wheeled mobility device users and non-disabled adults. Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics, 2010 AHFE International, Miami, FL, July 2010.
- D'Souza, C., Steinfeld, E., Paquet, V. and Feathers, D. (2010). Space requirements for wheeled mobility devices in public transportation: An analysis of clear floor space requirements. Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, D.C., TRB, January 2010.
- D’Souza, C., Steinfeld, E. and Paquet, V. (2009). Functional reach for wheeled mobility device users: A comparison with ADA-ABA guidelines for accessibility. Proceedings of the Rehabilitation Engineering Society of North America (RESNA) Annual Conference 2009, New Orleans, June 2009.
- D’Souza, C., Steinfeld, E. and Paquet, V. (2009). Functional reach abilities of wheeled mobility device users: toward inclusive design. Proceedings of the 2009 International conference on Inclusive Design, INCLUDE 2009, ISBN 978-1-905000-80-7, Royal College of Art, London, UK, April 2009.
- Paquet, V. (2009). Moving from accommodation to universal design. Proceedings of the 52nd Annual Meeting of the Human Factors and Ergonomics Society, September 22-26, 2008.
- Drury, C., Koontz, A., Feathers, D., Kankipati, P., Paquet, V. and Lin, J-F. (2009). Controllability of manual and powered wheelchairs for spinal cord injury users. Proceedings of the 52nd Annual Meeting of the Human Factors and Ergonomics Society, September 22-26, 2008.
- Narsarwanji, M., Paquet, V., Feathers, D. and Lenker, J., (2008). Usability study of a powered lift for wheelchair users. Proceedings of the 52nd Annual Meeting of the Human Factors and Ergonomics Society, September 22-26, 2008.
- Paquet, V., Lenker, J., Feathers, J. and Nasarwanji, M. (2008). Incorporating the principles of universal design into assessment of product usability. Proceedings of the 2nd International Conference on Applied Human Factors and Ergonomics. July 14-17.
- Lenker, J.A., Narsarwanji, M., Paquet, V., and Feathers, D. (2008). Usability of consumer products in the home by adult wheelchair users. Proceedings of the 2nd International Conference on Applied Human Factors and Ergonomics. July 14-17.
- Lenker, J., Feathers, D., Nasarwanji, M. and Paquet, V. (2008). Perspectives of elders on product usability in the home. Proceedings of the International Conference on Aging, Disability and Independence, St. Petersburg, February 20-23.
- D’Souza, C., Feathers, D. and Paquet, V. L. (2007). Constructing three-dimensional models of individuals and their wheeled mobility devices from landmark data. Technical Paper 2007-01-2494. Proceedings of the 2007 SAE Digital Human Modeling Conference, June 2007, Seattle, WA.
- Feathers, D. and Paquet, V. (2006). Three-dimensional variability of static anthropometric dimensions: considering anatomy, behavior and process, Proceedings of the Human Factors and Ergonomics Society 49th Annual Meeting.
- Jui-Feng, L. Drury, C. and Paquet, V. (2006). A quantitative methodology for assessment of wheelchair controllability, Proceedings of the Human Factors and Ergonomics Society 49th Annual Meeting.
- Paquet, V. (2006). The new role of ergonomics in the universal design of products and environments, Proceedings of the 15th Triennial Congress of the International Ergonomics Association.
- Steinfeld, E., Paquet, V., and Feathers, D. (2004). Space requirements for wheeled mobility, Proceedings of the Human Factors and Ergonomics Society 47th Annual Meeting.
- Feathers, D., Paquet, V. and Drury, C. (2002). Effects of automation of measurement error and consistency in anthropometry, Proceedings of the Human Factors and Ergonomics Society 46th Annual Meeting, 1215-1219.
- Feathers, D., Paquet, V. and Polzin, J. (2001). Reliability of structural anthropometric measurements with traditional and semi-automated approaches, Proceedings of the Human Factors and Ergonomics Society 456h Annual Meeting, 1036-1039.
- Paquet, V., Feathers, D. and Lenker, J. (2001). Three-dimensional measurements, semi-standardized postures and clothing: structural anthropometric methods for persons with disabilities, Proceedings of Anthropometrics of Disability: An International Workshop, (8-1)-(8-9).
- Lenker, J. and Paquet, V. (2001) Alternative approaches to sampling for anthropometric studies of persons with disability, Proceedings of Anthropometrics of Disability: An International Workshop, (11-1)-(11-7).
- D’Souza, C., Steinfeld, E., Paquet, V. and White, J. (2011). DR-15: Clear Floor Area for Wheeled Mobility: Redefining the ‘common wheelchair’. IDeA Center, Buffalo, NY. https://udeworld.com/documents/designresources/pdfs/CFA.pdf
- D’Souza, C., Steinfeld, E., Paquet, V. and White, J. (2011). DR-16: Clear Floor Area for Wheeled Mobility when Reaching or Grasping. IDeA Center, Buffalo, NY.
- D’Souza, C., White, J., Steinfeld, E. and Paquet, V. (2011). DR-17: Knee and Toe Clearances for Wheeled Mobility Users. IDeA Center, Buffalo, NY.
- D’Souza, C., Steinfeld, E., Paquet, V., Joseph, C. and Feathers, D. (2011). DR-18: Pinch Grip Forces for Wheeled Mobility Users. IDeA Center, Buffalo, NY.
- D’Souza, C., Steinfeld, E., Paquet, V., Joseph, C. and Feathers, D. (2011). DR-19: Power Grip Forces for Wheeled Mobility Users. IDeA Center, Buffalo, NY.
- D’Souza, C., Steinfeld, E., Paquet, V. and Feathers, D. (2011). DR-20: Functional Reach Capability for Wheeled Mobility Users. IDeA Center, Buffalo, NY.
- D’Souza, C., White, J., Steinfeld, E. and Paquet, V. (2011). DR-21: Turning Space for Wheeled Mobility Users – the 360 degree Turn. IDeA Center, Buffalo, NY.
- Steinfeld, E., Paquet, V., D’Souza, C., Joseph, C. and Maisel, J. (2010). Final Report: Anthropometry of Wheeled Mobility Project. Submitted to U.S. Access Board, Washington, D.C.
- D'Souza, C., Steinfeld, E. and Paquet, V. (2009). The Anthropometry of Wheeled Mobility Project at Buffalo: A comparison of wheelchair dimension values with ISO/CD TR 13570-2. Report prepared for: ISO TC173 SC1 WG1. IDeA Center, Buffalo, NY, October 2009.
- Paquet, V. and Steinfeld (2004). Space Requirements for Wheeled Mobility: An International Workshop. Final Project Report to the U.S. Access Board, March, 2004.
- Steinfeld, E., Lenker, J. and Paquet, V. (2002). Anthropometrics of Disability: An International Workshop. Final Project Report to the U.S. Access Board, February, 2002.
- Singh, R., Yurteri-Kaplan, L., Morrow, M., Weaver, A., McGree, M., Zhu, X., Paquet, V., Gebhart, J., Hallbeck, S. (2018). Sitting versus standing makes a difference in musculoskeletal discomfort and postural load for surgeons performing vaginal surgery. International Urogynecoloy Journal, pp. 1-7. https://doi.org/10.1007/s00192-018-3619-1
- Yurteri-Kaplan, L., Zhu, X., Iglesia, C., Gutman, R., Andrew, S., Paquet, V., and Park, A. (2018). Differences in postural loading between primary and assistant surgeons during vaginal surgery. International Journal of Industrial Ergonomics, 65(1): 60-67.
- Zhu, X., Yurteri-Kaplan, L., Cavuoto, L., Iglesia, C., Gutman, R., Sokol, A, Park, A., and Paquet, V. (2017). ErgoPART: A computerized observational tool to quantify postural loading in real-time during surgery. IIE Transactions on Occupational Ergonomics and Human Factors 5(1): 23-28.
- Hsiao, Y., Drury, C., Wu, C. and Paquet, V. (2013). Predictive models of safety based on audit findings (part 2): Measurement of model validity. Applied Ergonomics, 44(4): 659-666.
- Hsiao, Y., Drury, C., Wu, C. and Paquet, V. (2013). Predictive models of safety based on audit findings (part 1): Model development and reliability. Applied Ergonomics, 44(2): 261-273.
- Tak, S., Buchholz, B., Punnett, L., Moir, S., Paquet, V., Fulmer, S., Wellmen, H. and Wegman, D. (2011). Physical ergonomic hazards in highway tunnel construction: Overview from the Construction Occupational Health Program. Applied Ergonomics, 42 (5) 665-671.
- Mathiassen, S.E. and Paquet, V. (2010). The ability of limited exposure sampling to detect effects of interventions that reduce the occurrence of pronounced trunk inclination, Applied Ergonomics, 41(2): 295-304.
- Tak, S., Paquet, V., Woskie, S., Buchholz, B., and Punnett, L. (2009). Variability in risk factors for knee injury in construction, Journal of Occupational and Environmental Hygiene. 6(2):113-120.
- Tak, S., Punnett, L., Paquet, V., Woskie, S. and Buchholz, B. (2007). Estimation of compressive forces on lumbar spine from categorical posture data, Ergonomics 50(12), 2082-2094.
- Paquet, V., Mathiassen, S. and Dempsey, P. (2006) A practitioner’s guide to reliable video-based ergonomics job analysis, Professional Safety, November, pp. 27-35.
- Paquet, V., Punnett, L., Woskie, S. and Buchholz, B. (2005) Reliable exposure assessment strategies for physical ergonomic stressors in construction and other non-routinized work, Ergonomics, 48(9): 1200-1219.
- Paquet, V. and Nirmale, R. (2004). Musculoskeletal stress due to trunk flexion during light assembly work, Applied Biomechanics, 3: 199-212.
- Moir, S., Paquet, V., Punnett, L. and Buchholz, B. (2003). Making sense of highway construction: a taxonomic framework for ergonomic exposure assessment and intervention research, Applied Occupational and Environmental Hygiene, 18(4): 256-267.
- Buchholz, B., Paquet, V., Wellman, H. and Forde, M. (2003). Quantification of ergonomic hazards for ironworkers performing concrete reinforcement tasks during heavy highway construction, American Industrial Hygiene Association Journal, 64: 243-250.
- Paquet, V. and Lin, L. (2002) An integrated methodology for manufacturing systems design using manual and computer simulations, Human Factors and Ergonomics in Manufacturing, 13(1): 19-40.
- Bisantz, A. and Paquet, V. (2002). Implementation and evaluation of a multi-course case study for framing laboratory exercises, Journal of Engineering Education, 91(3), 299-307.
- Huang, C. and Paquet, V. (2002). Kinematic evaluation of two snow shovel designs, International Journal of Industrial Ergonomics, 29, 319-330.
- Paquet, V., Punnett, L. and Buchholz, B. (2001). Validity of fixed-interval observations for postural assessment in construction work, Applied Ergonomics, 32(3) 215-224.
- Paquet, V., Punnett, L. and Buchholz, B (1999). An evaluation of manual materials handling in highway construction work, International Journal of Industrial Ergonomics, 24: 431-444.
- Buchholz, B., Paquet, V., Punnett, L., Lee, D. and Moir, S. (1996). PATH: a modified work-sampling of quantifying ergonomic exposures in construction work and other non-routinized work, Applied Ergonomics, 27(3): 177-187.
- Feathers, D., D’Souza, C., Paquet, V. (in press). Anthropometry for ergonomic design. In: Evaluation of Human Work, Wilson and Sharples (eds), CRC Press.
- Drury, C. and Paquet, V. (in press). Experimental design and analysis. In: Evaluation of Human Work, Wilson and Sharples (eds), CRC Press.
- Paquet, V. and Feathers, D. Anthropometry (2004). Encyclopedia of Human-Computer Interaction. William Bainbridge (Ed.). New York: Berkshire.
- Drury, C. and Paquet, V. (2004). Posture and performance. In: Working Postures and Movements – Tools for Evaluation and Engineering. D. Chaffin, N. Delleman D. Haslegrave, (eds). Taylor and Francis.
- Buchholz, B. and Paquet, V. (1998). Reducing hazards during highway tunnel construction. In Ergonomics in Health Care and Rehabilitation, V. Rice (ed), Butterworth-Heinemann, pp. 187-203.
- Zhu, X., Yurteri-Kaplan, L., Gutman, R., Sokol, A., Iglesia, C., Park, A., & Paquet, V. (2014). Postural stress experienced by vaginal surgeons, Proceedings of the Human Factors and Ergonomics Society 58th Annual Meeting - Chicago, IL.
- Zhu, X., Yurteri-Kaplan, L., Sokol, A., Iglesia, C., Gutman, R., Park, A., & Paquet, V. (2014). An observational ergonomics job analysis method to quantify postural risk factors for musculoskeletal injury among gynecologic vaginal surgeons, American Urogynecologic Society (AUGS) and the International Urogynecological Association (IUGA) Annual Meeting – Washington, DC.
- Yurteri-Kaplan, L., Zhu, X., Iglesia, C., Gutman, R., Sokol, A., Paquet, V., & Park, A., (2014). The Ergonomics of Vaginal Surgeons: Opportunities to Advance the Science from Awkward Straining to Optimal Positioning, American Urogynecologic Society (AUGS) and the International Urogynecological Association (IUGA) Annual Meeting – Washington, DC.
- Fenzl, M., Paquet, V., and Ray, A. (2013). Patient handling equipment improvements to enhance care during patient transfers. Preceedings of the IIE Annual Conference .
- Heberger, J., Nasarwanji, M., Pollard, J., Dempsey, P., and Paquet, V. (2012). Inter-rater reliability of video-based ergonomic job analysis for maintenance work in metals processing and coal preparation plants. Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society. Boston, MA.
- Nasarwanji, M., Joseph, C. and Paquet, V. (2007). Observational ergonomics job analysis in light manufacturing. Proceedings of PREMUS 2007: The Sixth International Scientific Conference on Prevention of Work-related Musculoskeletal Disorders, Boston, August 27-30.
- Tak, S., Punnett, L., Paquet, V., Buchholz, B. and Woskie, S. (2007). Sources of variance in risk factors for knee injury in construction. Proceedings of PREMUS 2007: The Sixth International Scientific Conference on Prevention of Work-related Musculoskeletal Disorders, Boston, August 27-30.
- Paquet, V. and Mathiassen, S. E. (2007). Ability of limited sampling to describe exposure effects of ergonomics interventions. Proceedings of PREMUS 2007: The Sixth International Scientific Conference on Prevention of Work-related Musculoskeletal Disorders, Boston, August 27-30.
- Paquet, V. (2006). Effective use of observations for job analysis for ergonomics practice, Proceedings of the 15th Triennial Congress of the International Ergonomics Association.
- Tak, S., Punnett, L., Moir, S., Buchholz, B., Paquet, V. and Wegman, D. (2006). Physical ergonomic hazards in highway tunnel construction: Summary report of COHP (Construction Occupational Health Program), Proceedings of the American Public Health Association 134th Annual Meeting.
- Nasarwanji, M. and Paquet, V. (2006). Ergonomics for electronics manufacturing, Proceedings of the Institute of Industrial Engineering Research Conference.
- Prabhu, H. and Paquet, V. (2003). Ergonomic job analysis strategies for manufacturing jobs, Proceedings of the Human Factors and Ergonomics Society 47th Annual Meeting, 1189-1193.
- Paquet, V. and Lin, L. (2002). A methodology for incorporating ergonomics into manufacturing systems, Proceedings of the Human Factors and Ergonomics Society 46th Annual Meeting, 1022-1026.
- Shyhalla, K., Paquet, V. and Drury, C. (2002). Wrist and forearm postures during movements to targets during repetitive precision tasks, Proceedings of the Human Factors and Ergonomics Society 46th Annual Meeting, 1041-1045.
- Huang, C. and Paquet, V. (2001). Kinematic evaluation of two snow shovel designs, Proceedings of the Human Factors and Ergonomics Society 45th Annual Meeting, 957-961.
- Nirmale, R. and Paquet, V. (2001). Effect of mild trunk flexion on musculoskeletal stress during light assembly work, Proceedings of the Human Factors and Ergonomics Society 45th Annual Meeting, 1016-1020.
- Paquet, V., Punnett, L. and Woskie, S. (2001). Can the ergonomic analysis of non-routinized work really be efficient?, In: M. Hagberg, et al., editors, X-2001 – Exposure Assessment in Epidemiology and Practice, 250-252.
- Paquet, V., Punnett, L., Woskie, S. and Buchholz, B. (2000). Developing reliable ergonomic exposure assessment strategies for construction work, Proceedings of the Human Factors and Ergonomics Society 44th Annual Meeting, 655-658.
- Paquet, V. and Buchholz, B. (1999). Evaluation of an electronic system for the continuous and simultaneous assessment of body postures, Proceedings of the Human Factors and Ergonomics Society 43rd Annual Meeting, 656-659.
- Paquet, V. Punnett, L. and Buchholz, B. (1998). A validity study of fixed-interval observations for the assessment of body postures during construction work, Proceedings of the Human Factors and Ergonomics Society 42nd Annual Meeting, 945-949.
- Paquet, V., Punnett, L. and Buchholz, B. (1997). Observational work sampling for the ergonomic exposure assessment of non-repetitive work, Proceedings of the 13th Triennial Congress of the International Ergonomics Association, vol. 6, 157-159.
- Punnett, L. and Paquet, V. (1996). Ergonomic exposures to carpenters and carpentry laborers in tunnel construction, In: A. Mital, et al., editors, Advances in Occupational Ergonomics and Safety I (proceedings of the XIth International Occupational Ergonomics and Safety Conference), Amsterdam: IOS Press, 1996.
- Paquet, V. and Buchholz, B. (1996). Reducing ergonomic hazards during highway tunnel finishing construction operations, Proceedings of the American Industrial Hygiene Conference and Exposition.
- Buchholz, B. and Paquet, V. (1996). Ergonomic hazards during concrete reinforcement work at a large highway construction site, Proceedings of the American Industrial Hygiene Conference and Exposition.
- Paquet, V., Buchholz, B., Punnett, L. and Moir, S. (1995). Quantification of ergonomic exposures in tile-setting for the prevention of work-related musculoskeletal disorders, Proceedings of the 2nd International Scientific Conference on the Prevention of Work-related Musculoskeletal Disorders, 323-324.
- Lee, D., Buchholz, B., Punnett, L., Moir, S., Alexeeva, E., Paquet, V. and Wegman, D. (1994). “PATH”: a modified work sampling method to collect ergonomic hazard data in construction work, Proceedings of the American Industrial Hygiene Conference and Exposition, 256-261.
- Paquet, V. and Price, D. (1993). Attitudes of the knowledgeable toward the transportation of spent fuel, Proceedings of the Fourth Annual International Conference on High Level Radioactive Waste Management, 1896-1903.
- Paquet, V. (2014). Grant Progress Report (grant#:5T01OH008849-02): University at Buffalo Occupational Safety and Health Training Project. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health
- Paquet, V. (2013). Grant Progress Report (grant#:5T01OH008849-02): University at Buffalo Occupational Safety and Health Training Project. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2012). Project Report: Improving Ergonomics Practices at Worthington Cylinders, Submitted to Worthington Cylinders, Inc., Medina, NY.
- Paquet, V. (2012). Grant Progress Report (grant#:5T01OH008849-02): University at Buffalo Occupational Safety and Health Training Project. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2011). Project Report: Ergonomics Job Analysis to Improve Tank Loading Operations at Unifrax I LLC, Submitted to Unifrax, Inc., Tonawanda, NY.
- Paquet, V. (2008). Project Report: Recommendations to Improve Machine Guarding at Ttarp Industries, Inc. Submitted to Ttarp Industries, Inc., Amherst, NY.
- Paquet, V. (2011). Grant Progress Report (grant#:5T01OH008849-02): University at Buffalo Occupational Safety and Health Training Project. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2010). Grant Progress Report (grant#:5T01OH008849-02): University at Buffalo Occupational Safety and Health Training Project. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2009). Grant Progress Report (grant#:5T01OH008849-02): A New Multidisciplinary Training Approach to Advance OS&H Practice in WNY. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2008). Grant Progress Report (grant#:5T01OH008849-02): A New Multidisciplinary Training Approach to Advance OS&H Practice in WNY. Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Paquet, V. (2008). Project Report: Recommendations to Improve Machine Guarding at Ttarp Industries, Inc. Submitted to Ttarp Industries, Inc., Amherst, NY.
- Paquet, V. and Shyhalla, K. (2006). Final Performance Report: Musculoskeletal stress in repetitive precision tasks (grant#:R03 OH07532-02). Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention.
- Paquet, V. (2006). Facilitating ergonomics practices at Greatbatch Technologies, Inc. Submitted to Greatbatch Technologies, Alden, NY.
- Paquet, V. (2005). Final Performance Report: Alternative ergonomic job analysis methods for manufacturing (grant#:R03 OH04105-02). Submitted to the Department of Health and Human Services, Center for Disease Control and Prevention.
- Paquet, V. (2001). Ergonomic Solutions for a Manufacturing Cell at American Allsafe. Final Project Report to American Allsafe Company, July 2001.
- Lin, L. and Paquet, V. (2000). Mock-up and Simulation Study for the Design of Manufacturing Cells at Delphi Harrison Thermal Systems. Final Project Report to Delphi Harrison Thermal Systems, August, 2000.
- Lin, L. and Paquet, V. (2000). Using Mock-ups and Computer Simulation for the Design of Manufacturing Cells. Report to Delphi Harrison Thermal Systems, August, 2000.
- Paquet, V. (2000). Ergonomic Solutions to Reduce Turnover among Sanders, Final Report to Rave, Inc., Tonawanda, NY, July 2000.
- Paquet, V. (1998). The Assessment of Ergonomic Exposures in Construction Work. Sc.D. thesis, Department of Work Environment, University of Massachusetts Lowell, Lowell, MA.
- Paquet, V. (1995). The Effects of Keyboard Height, Wrist Support and Keying Time on Wrist Posture and Trapezius EMG during Keyboarding. M.S. thesis, Department of Industrial and Systems Engineering, Virginia Polytechnic and State University, Blacksburg, VA.
- Punnett, L. Paquet, V. and Rodwell, W. (1995). Work Sampling Survey of Construction Workers in Boston, MA, Construction Project, Final Report to the National Institute of Occupational Safety and Health (Contract #1 R01 OH02741), Oct. 1995.
- Paquet, V., Rodwell, W. and Grasso, M. (1995). Reducing Ergonomic Hazards during Ceiling Module Assembly and Installation for Walsh Construction Company, Technical Report: Construction Occupational Health Project, Department of Work Environment, University of Massachusetts Lowell, Lowell, MA
- Stone, R., Bisantz, A., Paquet, V. and Llinas, J. (2009). Augmented Multisensory Interface Design (AMID): Validating a human centric approach to unisensory and multisensory augmented reality design, Journal of Cognitive Engineering and Decision Making , 3(4): 362-388.
- Bisantz, A. and Paquet, V. (2002). Implementation and evaluation of a multi-course case study for framing laboratory exercises. Journal of Engineering Education, 91 (3): 299-307.
- Stone, R.T, Bisantz, A., Llinas, J. and Paquet, V. Improving tele-robotic navigation through augmented reality devices. Proceedings of the 53rd Annual Meeting of the Human Factors and Ergonomics Society, October 19-23, 2009.
- Lin, J-F., Drury, C., Karwan, M. and Paquet, V. A general model that accounts for Fitts' law and Drury's model. Proceedings of the 17th Congress of the International Ergonomics Association, July 2009.
- Stone, R.T., Bisantz, A., Llinas, J. and Paquet, V. (2008). Improving tele-robotic landmine detection through augmented reality devices. Proceedings of the 52nd Annual Meeting of the Human Factors and Ergonomics Society, September 22-26, 2008.
- Stone, R., Bisantz, A., Llinas, J. and Paquet, V. (2008). Multisensory augmented reality, Proceedings of the 17th Institute of Industrial Engineering Research Conference, Vancouver, Canada, May 17 – 21.
- Stone, R., Bisantz, A., Paquet, V. and Llinas, J. (2007). Augmented multisensory interfaces: performance enhancement capabilities and training potential. Institute of Industrial Engineers Doctoral Colloquium. Nashville, TN.
- Bisantz, A. and Paquet, V. (2001). Case study based laboratories for an undergraduate human factors engineering curriculum, Proceedings of the 2001 American Society for Engineering Education Annual Conference and Exposition, Section 1526, 1-10.